Store Locator
Store Locator
Install in each fence line together with strainer. Necessary to keep wires taut during temperature changes. Use to determine tension on wires. All...
View full details10,000v, digital v meter, for electric fence, powered by 9v battery, extremely sensitive & accurate.
For t-posts. Fits 1.25 and 1.33 lb/ft posts. Heavy cross sections withstand the pressure of high tensile fencing. Large flange prevents shorts and...
View full detailsUse to hold horizontal wood brace beams. 3/8" dia. x 5" & 10". Galvanized steel. 10 in. pin 5 to counter pkg 10 pkgs (50) to shipper 15 lbs.
These strainers are used to keep tension on high tensile wire in a high tensile fence Tighten with 5/8 inch socket or #1701 handle Made in the usa
High tensile steel wire cutter for cutting the high tensile wires used in fencing and vineyards Hardened jaws designed to cut 12 1/2 gauge tensile...
View full detailsHeavy duty cutoff switch will stop electricity in emergency or for repairs to fencing Can use several in each electric fence for convenience Schem...
View full details6 mm x 600', white, twisted hd polyethylene rope, with 7 strands of stainless steel wire, 15/64" approximately diameter, 720 lb approximate tensile...
View full detailsHigh strain corner & end assembly for electric fence Installs to any wood post or tree as a corner or for straight line fencing Contains: 3/8 ...
View full detailsUse to splice 9 ga. smooth, 12 1/2 & 13 1/2 ga. barbed wire. (.148" - .200"). Enlarged. 10 to counter pkg 20 pkgs (200) to shipper 4.7 lbs.
Economy Model. Float housing molded of high impact ABS plastic. Has same float and non-siphoning unit as valve as 1800 model. Withstands abuse and ...
View full detailsDouble throw, cut off switch, for outdoor use on electric fence, install several on each electric fence for convenience & safety, use to change...
View full detailsFastens fence or barbed wire to posts Compatible with 1.25 Lb./Ft. & 1.33 Lb./Ft. standard size studded T-posts 11 Ga. Galvanized Wire
Easily anchors into wood post Screw-in style Compatible with all styles of gate handles Heavy-duty steel construction
50 piece, 2", 9 gauge, type iii galvanized barbed staples.
Porcelain Insulator with Lag Bolt. Standard size. Produced from specially formulated electrical porcelain for superior dielectric and mechanical st...
View full detailsHeavy duty porcelain corner insulator. No. 36. Produced from specially formulated electrical porcelain for superior dielectric and mechanical stren...
View full details25 pack. Use to splice 14 1/2 & 15 1/2 gauge smooth wire. (.080" - .067"). 25 to counter pkg 20 pkgs (500) to shipper 1.6 lbs.
Stretches to fit gate opening up to 20 feet. Retracts to keep gate off ground when open. Electrified when closed, neutral when open. Highly visibl...
View full detailsStrainer crank handle, use with 1703 & 1703c wire strainers, universal, fits all.
Single electric fence (lamp) tester, essential to make spot checks in the field Helps locate faults such as opens, shorts, and partial grounds Lam...
View full detailsEasy "snap in" installation No pins to lose 360 degree mounting option
Electric fence lightning arrestor, complete with clamps for wire & ground, best for high tensile, heavy duty, farm tested & proven, include...
View full detailsSafety hook and body formed as one. . . From 7/8" diameter steel pipe. Spring mechanism consists of 4 1/4" long compression spring fastened to a 5...
View full details