Plumbing

NSF pw-G , ASTM D2466 A Reducing Tee is used to connect different diameters of pipe to each other at a 90 degree angle. Threaded hubs solvent weld ...

Bushings are used to reduce the size of pipe connecting to a fitting. This one is solvent welded to a fitting socket and a smaller size pipe.

1 1/2"x1 1/4" Xirtec PVC Schedule 40, White Reducer Bushing Spig x Soc

NSF pw-G , ASTM D2466 PVC Schedule 40 Elbows are used to change direction in a condenstate drainage pipe by 45 degrees.

NSF pw-G , ASTM D2466 Used to change direction in a pipe run by 90 degrees.  The  socket end solvent welds to a pipe or spigot end of a fitting whi...

A female threaded (FPT) cap is used to seal an MPT fitting or to close off a pipe run ending in an MPT fittings.Seal off unused MPT fittings or pip...

NSF pw-G , ASTM D2466 Bushings are used to reduce the size of pipe connecting to a fitting. This one is solvent welded to a fitting socket and used...

IPEX Reducing Pipe Adapter, 3/4 x 1/2 in Nominal, Slip x MPT Connection, 480 psi Pressure, 140 deg F Operating, SCH 40 Schedule, PVC, White, 1-3/4 ...

PVC Schedule 40 Crosses or 4-way fittings  are comprised of three  outlets and one inlet or vice versa.  Socket-end solvent weld connections.

A threaded bushings threads into an FPT fitting and connects to a smaller size MPT fitting.

This Reducing Tee is used to connect a smaller size MPT fitting to a run of solvent weld pipe at a 90˚ angle.  Threaded hubs solvent weld to pipe.

A male adapter is used to convert from solvent weld pipe to a female threaded (FPT) connection maintaining the same size of pipe and fitting.